1030

Type C Steel Sprockets for No. 1030 Mill Chain

3.075″ Chain Pitch – 1 1/4″ Barrel Diameter – 1 1/4″ Sprocket Face Width

Stock bores are nominal and must be re-bored even though bore desired is

same size as listed stock bore.

Listed maximum bore is with set screw at angle to keyway.

Stock sprockets above may also be used with the following chains or others having the same pitch, barrel diameter and width,

however all may not clear standard hub on 6 and 7 tooth sprockets due to variations in side bars.

Chain Belt – Champion No. 3, 1030DW, 1033, R1033, R1035, 1037, 1539

Jeffrey – 3DD, SS39, IS1030, IS1031, IS1032, IS1037, IS3075

Link Belt – AP13 Redhead, SS39, SS39+, SS40, SS40 Hyper, SS40+, LXS1031, LXS1032, LXS1032M, SS1033, LXS3075M

Moline – MXS40, MXS1031, MXS3075

Union – 119J, 119R, 119RX, US1031, US1032, 1190R, 1190R3, 1190RX, 1190SX, 1190SXX

Webster – SS54+, S554

Sprockets of other face widths or tooth numbers as well as those for practically any other chain are readily

available and all can be furnished with hardened teeth. Please inquire for information and delivery.

Split Mill Chain Sprocket info (PDF)

Filtering:
Catalog Number
Pitch Diameter
Filter Clear
Maximum Bore
Filter Clear
Stock Bore
Filter Clear
Hub Diameter
Filter Clear
Length Through Bore
Filter Clear
Sprocket Weight
Group
1030C - 3.075
1030C7 7.087 3.000" 1.437" 4.50" 3.870" 26.00lbs
1030C8 8.034 3.250" 1.437" 5.00" 4.120" 34.00lbs
1030C9 8.991 3.250" 1.437" 5.00" 4.120" 38.00lbs
1030C10 9.950 3.250" 1.687" 5.00" 4.120" 43.00lbs
1030C11 10.913 3.750" 1.687" 5.50" 4.500" 54.00lbs
1030C12 11.881 3.750" 1.687" 5.50" 4.500" 60.00lbs
1030C13 12.850 3.750" 1.687" 5.50" 4.500" 67.00lbs
1030C14 13.819 3.750" 1.687" 5.50" 4.500" 74.00lbs
1030C15 14.790 4.000" 1.687" 6.00" 4.500" 86.00lbs
1030C16 15.762 4.000" 1.687" 6.00" 4.500" 98.00lbs
1030C17 16.734 4.000" 1.687" 6.00" 4.500" 103.00lbs