102-B

Type C Steel Sprockets for No. H124 Mill Chain

4.000″ Chain Pitch – 1″ Barrel Diameter – 1 3/4″ Sprocket Face Width

Stock bores are nominal and must be re-bored even though bore desired is

same size as listed stock bore.

Listed maximum bore is with set screw at angle to keyway.

Stock sprockets above may also be used with the following chains or others having the same pitch, barrel diameter and width,

however all may not clear standard hub on a 7 tooth sprockets due to variations in side bars.

Jeffrey – C102BM, 6102BM

Link Belt – C102B, SS102B

Moline – C102B, SS102B

Rexnord – A102B, S102B

Webster – HSB102B, N102B, CR-N102B

Sprockets of other face widths or tooth numbers as well as those for practically any other chain are readily

available and all can be furnished with hardened teeth. Please inquire for information and delivery.

Split Mill Chain Sprocket info (PDF)

Filtering:
Catalog Number
Pitch Diameter
Filter Clear
Maximum Bore
Filter Clear
Stock Bore
Filter Clear
Hub Diameter
Filter Clear
Length Through Bore
Filter Clear
Sprocket Weight
Group
102-B Mill Chain - 4.000" Chain Pitch - 1" Barrel Diameter - 1 3/4" Sprocket Face Width
Flame Cut Teeth - Type C Hub Both Sides - Mandrel Bore
102BC8 10.452 4.000" 1.687" 6.00" 5.000" 77.00lbs
102BC9 11.695 4.500" 1.687" 6.50" 5.000" 82.00lbs
102BC10 12.944 4.500" 1.687" 6.50" 5.000" 90.00lbs
102BC11 14.197 4.500" 1.687" 6.50" 5.000" 103.00lbs
102BC12 15.454 4.750" 2.187" 7.00" 5.120" 128.00lbs
102BC13 16.714 4.750" 2.187" 7.00" 5.120" 144.00lbs
102BC14 17.976 4.750" 2.187" 7.00" 5.120" 161.00lbs
102BC15 19.238 4.750" 2.187" 7.00" 5.120" 179.00lbs
102BC16 20.503 5.500" 2.187" 8.00" 5.620" 215.00lbs
102BC17 21.768 5.500" 2.187" 8.00" 5.620" 236.00lbs
102BC18 23.035 5.500" 2.187" 8.00" 5.620" 258.00lbs
102BC19 24.302 5.500" 2.187" 8.00" 5.620" 282.00lbs