C132

Type C Steel Sprockets for No. C132 Mill Chain

6.050″ Chain Pitch – 1 23/32”, 1 3/4″ or 1 25/32” Barrel Diameter – 2 3/4″ Sprocket Face Width

Stock bores are nominal and must be re-bored even though bore desired is

same size as listed stock bore.

Listed maximum bore is with set screw at angle to keyway.

Stock sprockets above may also be used with the following chains or others having the same pitch, barrel diameter and width,

however all may not clear standard hub on 6 and 7 tooth sprockets due to variations in side bars.

Chain Belt – A132, A132WS, SX150, SXA150, W155, WH155, WR155, W157, WH157, WR157

Jeffrey – WS132, 6150P

Link Belt – C132W, C132W1, SS132, SS150, SS150+

Moline – PW132

Union – 132, 150, 150X

Webster – S150, S150+

Sprockets of other face widths or tooth numbers as well as those for practically any other chain are readily

available and all can be furnished with hardened teeth. Please inquire for information and delivery.

Split Mill Chain Sprocket info (PDF)

Filtering:
Catalog Number
Pitch Diameter
Filter Clear
Maximum Bore
Filter Clear
Stock Bore
Filter Clear
Hub Diameter
Filter Clear
Length Through Bore
Filter Clear
Sprocket Weight
Group
C-132 Mill Chain - 6.050" Chain Pitch - 1 23/32", 1 3/4" Barrel Diameter - 2 3/4" Sprocket Face Width
Flame Cut Teeth - Type C Hub Both Sides - Mandrel Bore
C132C6 12.100 4.500" 2.187" 6.50" 6.000" 118.00lbs
C132C7 13.945 4.500" 2.187" 6.50" 6.000" 138.00lbs
C132C8 15.808 4.500" 2.187" 6.50" 6.000" 182.00lbs
C132C9 17.690 4.750" 2.187" 7.00" 6.120" 225.00lbs
C132C10 19.577 4.750" 2.187" 7.00" 6.120" 279.00lbs
C132C11 21.471 4.750" 2.187" 7.00" 6.120" 316.00lbs
C132C12 23.377 5.500" 2.187" 8.00" 6.620" 386.00lbs