H124

Type C Steel Sprockets for No. H124 Mill Chain

4.000″ Chain Pitch – 1 7/16″ Barrel Diameter – 1 1/2″ Sprocket Face Width

Stock bores are nominal and must be re-bored even though bore desired is

same size as listed stock bore.

Listed maximum bore is with set screw at angle to keyway.

Stock sprockets above may also be used with the following chains or others having the same pitch, barrel diameter and width,

however all may not clear standard hub on 6 and 7 tooth sprockets due to variations in side bars.

Chain Belt – W124, WR124, WH124

Jeffrey – WS124

Sprockets of other face widths or tooth numbers as well as those for practically any other chain are readily

available and all can be furnished with hardened teeth. Please inquire for information and delivery.

Split Mill Chain Sprocket info (PDF)

Filtering:
Catalog Number
Pitch Diameter
Filter Clear
Maximum Bore
Filter Clear
Stock Bore
Filter Clear
Hub Diameter
Filter Clear
Length Through Bore
Filter Clear
Sprocket Weight
Group
H-124 Mill Chain - 4.000" Chain Pitch - 1 7/16" Barrel Diameter - 1 1/2" Sprocket Face Width
Flame Cut Teeth - Type C Hub Both Sides - Mandrel Bore
H124C6 8.000 3.000" 1.437" 4.50" 4.120" 33.00lbs
H124C7 9.220 3.750" 1.437" 5.50" 4.750" 49.00lbs
H124C8 10.452 3.750" 1.687" 5.50" 4.750" 57.00lbs
H124C9 11.696 3.750" 1.687" 5.50" 4.750" 66.00lbs
H124C10 12.944 3.750" 1.687" 5.50" 4.750" 76.00lbs
H124C11 14.196 4.000" 1.687" 6.00" 4.750" 91.00lbs
H124C12 15.456 4.000" 1.687" 6.00" 4.750" 104.00lbs
H124C13 16.716 4.000" 1.687" 6.00" 4.750" 118.00lbs
H124C14 17.976 4.000" 1.687" 6.00" 4.750" 132.00lbs
H124C15 19.240 4.500" 2.187" 6.50" 4.750" 151.00lbs
H124C16 20.504 4.500" 2.187" 6.50" 4.750" 167.00lbs
H124C18 23.036 4.500" 2.187" 6.50" 4.750" 204.00lbs