H60

Type C Steel Sprockets for No. H60 Mill Chain

2.308″ Chain Pitch – 3/4″ Barrel Diameter – 11/16″ Sprocket Face Width

Stock bores are nominal and must be re-bored even though bore desired is

same size as listed stock bore.

Listed maximum bore is with set screw at angle to keyway.

Stock sprockets may also be used with the following chains or others having the same pitch, barrel diameter and width; however all may not clear standard hub on 6 and 7 tooth sprockets due to variations in side bars.

Chain Belt – D60, 77, R506

Jeffrey – C160, 1094C

Link Belt – C60, C77, LXS770

Moline – C77, 477

Union – C60, US770

Sprockets of other face widths or tooth numbers as well as those for practically any other chain are readily available and all can be furnished with hardened teeth. Please inquire for information and delivery.

Split Mill Chain Sprocket Info (PDF)

Filtering:
Catalog Number
Pitch Diameter
Filter Clear
Maximum Bore
Filter Clear
Stock Bore
Filter Clear
Hub Diameter
Filter Clear
Length Through Bore
Filter Clear
Sprocket Weight
Group
H- 60 Mill Chain - 2.308″ Chain Pitch – 3/4″ Barrel Diameter – 11/16″ Sprocket Face Width
Flame Cut Teeth - Type C Hub Both Sides - Mandrel Bore
H60C6 4.616 1.750" 1.000" 2.75" 2.370" 6.00lbs
H60C7 5.319 2.250" 1.000" 3.25" 2.750" 9.00lbs
H60C8 6.030 2.250" 1.000" 3.50" 2.810" 11.00lbs
H60C9 6.748 2.250" 1.000" 3.50" 2.810" 13.00lbs
H60C10 7.468 2.750" 1.250" 4.00" 2.810" 16.00lbs
H60C11 8.191 2.750" 1.250" 4.00" 2.810" 18.00lbs
H60C12 8.918 2.750" 1.250" 4.00" 2.810" 20.00lbs
H60C13 9.645 2.750" 1.250" 4.00" 2.810" 22.00lbs
H60C15 11.101 2.750" 1.250" 4.00" 2.810" 26.00lbs