H82

Type C Steel Sprockets for No. H82 Mill Chain

3.075″ Chain Pitch – 1 7/32″ Barrel Diameter – 1 1/8″ Sprocket Face Width

Stock bores are nominal and must be re-bored even though bore desired is

same size as listed stock bore.

Listed maximum bore is with set screw at angle to keyway.

Stock sprockets above may also be used with the following chains or others having the same pitch, barrel diameter and width,

however all may not clear standard hub on 6 and 7 tooth sprockets due to variations in side bars.

Chain Belt – WH82, WR82, 103, 131, S131, C9103

Jeffrey – WS82, WS82H, 6131

Link Belt – 103, C131, SS131, 5103

Moline – C131, C131C, SS131, 4103

Union – 131, 527R, 527RX

Webster – S131

Sprockets of other face widths or tooth numbers as well as those for practically any other chain are readily

available and all can be furnished with hardened teeth. Please inquire for information and delivery.

Filtering:
Catalog Number
Pitch Diameter
Filter Clear
Maximum Bore
Filter Clear
Stock Bore
Filter Clear
Hub Diameter
Filter Clear
Length Through Bore
Filter Clear
Sprocket Weight
Group
H-82 Mill Chain - 3.075″ Chain Pitch – 1 7/32″ Barrel Diameter – 1 1/8″ Sprocket Face Width
Flame Cut Teeth - Type C Hub Both Sides - Mandrel Bore
H82C6 6.150 2.250" 1.250" 3.50" 3.250" 15.00lbs
H82C7 7.087 3.000" 1.437" 4.50" 3.750" 24.00lbs
H82C8 8.034 3.250" 1.437" 5.00" 4.000" 32.00lbs
H82C9 8.991 3.250" 1.437" 5.00" 4.000" 36.00lbs
H82C10 9.950 3.250" 1.687" 5.00" 4.000" 40.00lbs
H82C11 10.913 3.750" 1.687" 5.50" 4.370" 50.00lbs
H82C12 11.881 3.750" 1.687" 5.50" 4.370" 56.00lbs
H82C13 12.850 3.750" 1.687" 5.50" 4.370" 62.00lbs
H82C14 13.819 3.750" 1.687" 5.50" 4.370" 68.00lbs
H82C15 14.790 4.000" 1.687" 6.00" 4.370" 79.00lbs
H82C16 15.762 4.000" 1.687" 6.00" 4.370" 86.00lbs
H82C17 16.734 4.000" 1.687" 6.00" 4.370" 95.00lbs
H82C18 17.708 4.500" 2.187" 6.50" 4.370" 106.00lbs
H82C19 18.683 4.500" 2.187" 6.50" 4.370" 115.00lbs
H82C20 19.655 4.500" 2.187" 6.50" 4.370" 124.00lbs