HINGE TOP CONVEYER SPROCKETS


Steel Hinge Top Conveyor Chain Sprockets with or without shroud plates in a range of tooth sizes.

1 5/8″ Through Bore – No Hub Projection – Mandrel Bore – For S-815 And Other Flat Top Conveyor Chain Of Same Specifications

Sprockets with 19, 21, 23 and 25 teeth stocked with and without center groove. Add suffix ā€˜Gā€™ to part number.

Effective number of teeth is one half of listed number so chain contacts alternate teeth each revolution. For this reason, odd numbers of teeth are listed and recommended, although other sizes can be supplied if required. For smooth operation, sprockets of 19teeth or more are recommended.

Standard sprockets are made from C1040 steel and are completely machined to provide the finest quality available. Sprockets of stainless steel, bronze or other materials can be made to order.

Filtering:
Catalog Number
Pitch Diameter
Filter Clear
Maximum Bore
Filter Clear
Stock Bore
Filter Clear
Hub Diameter
Filter Clear
Length Through Bore
Filter Clear
Sprocket Weight
Group
1 1/2" Pitch - Hinge Top Conveyor Chain Sprockets - Steel - 1 5/8" Face Width
S815A13 3.228 1.500" .750" 1.620" 3.00lbs
S815A15 3.688 1.750" .750" 1.620" 4.10lbs
S815A17 4.153 2.000" .750" 1.620" 5.30lbs
S815A19 4.620 2.250" .750" 1.620" 6.80lbs
S815A21 5.089 2.625" .750" 1.620" 8.40lbs
S815A23 5.560 2.875" .750" 1.620" 10.00lbs
S815A25 6.032 3.250" .750" 1.620" 12.00lbs
S815A27 6.504 3.500" 1.000" 1.620" 14.00lbs
S815A29 6.979 4.250" 1.000" 1.620" 12.00lbs
S815A31 7.452 4.625" 1.000" 1.620" 14.00lbs
S815C35 8.401 2.250" 1.000" 3.50" 1.620" 15.00lbs
S815C41 9.827 2.250" 1.000" 3.50" 1.620" 19.00lbs